Magic Mesh
Magic Mesh cases and mounts
Our cases for your own Heltec V4 board, and mounts for the car. Printed in ABS or ASA, never PLA.
The same cases our Magic Mesh radios ship in, sold on their own: put your V4 board in a case built to be carried and used, not just to cover it. And the cup holder mounts that keep a handheld or a Console in reach on the road.
Printed in ABS or ASA, never PLA
Most printed cases are PLA. PLA starts to soften around 60 °C, and a closed car in summer gets hotter than that. It also goes brittle in the sun.
ABS
Holds its shape to about 100 °C. Tough, and right for a case that lives in a car or a pocket.
ASA
As tough as ABS and made to stand the sun, so it does not fade or go chalky outdoors.
Launch priceMagic Mesh handheld case
$34.99$19.99Our own handheld case for the Heltec V4 board, in two shapes: the Pebble, the smaller one, or the Shard, the first and taller one. Room for the battery and the GPS module, the Magic Mesh mark and lettering set into the face in a second colour, a real button, a framed screen window, a carabiner loop and a proper SMA antenna socket. Pick the shape, the body colour and the lettering colour.
In the box: Front and back, battery keeper, button cap, and every screw and nut it takes. Board, battery, antenna and GPS module not included.
Shape
Body colour · Black
Lettering colour · Yellow
Launch priceMagic Mesh Console case
$39.99$19.99The desk station's case for the Heltec V4 board: a low wedge with the screen on the slope and the button under it, a battery bay for a 3000 mAh battery, a pocket for the GPS module, the antenna standing upright on its own turret, and a clamp that holds the power cable so a pull never reaches the board.
In the box: Top (with its pocket for a GPS module), bottom plate, antenna turret, battery keeper, board strap, cable clamp, button cap, and all 14 screws it takes. Board, battery, antenna, GPS module, antenna lead and USB cable not included.
Body colour · Black
Lettering colour · Yellow

Console car mount
$24.99The Console in a cup holder. Drop the plug in and turn the thumb wheel: three pads press out against the cup holder's wall and hold it fast. Turn it back and it lifts out. The Console clips into the tray and lifts straight off, and the tray turns in 15 degree steps toward the driver. Fits Consoles with the clip slots (from October 15, 2026).
In the box: The plug (body, post, three pads, floor disc, thumb wheel and cap), the tray, and the four screws it takes.

Handheld car cradle
$24.99The Magic Mesh handheld in a cup holder, on the same plug as the Console mount: turn the thumb wheel and its pads hold it fast. The handheld drops in from above and leans back so you can read the screen, with room under it for a USB-C cable to keep it charged.
In the box: The plug (body, post, three pads, floor disc, thumb wheel and cap), the cradle, and the four screws it takes. The cradle is made for the Shard.
Pick what you want above
Printed to order and shipped within about a week. Free USPS shipping in the US on orders of $149 and over ($7.95 under), or Priority Mail for $9.95 at checkout. No Magic PTT account needed: Stripe asks for your email and shipping address.
All sales are final. If your radio arrives dead, tell us within 30 days and return it to us; the return postage is yours. We examine it when it arrives and send a replacement. Drops, water and wear are not covered.
Reviews
AnthonyVerified buyer (Etsy)Nov 6, 2026· Magic Mesh Console case
If you are into Mesh, then this is a great console for your desktop. It is very well made, and the craftsmanship is top notch. The colors on the front really stand out nice too. It was a breeze to put together and install the board, battery and antenna. Great addition for my MagicMesh board. Grab one now, you won't regret it.
Write a review
Sign in with your Magic PTT account to write one. We read every review before it shows.
Sign in to write a review